Monday 24 November 2008

Glueing up the frame

As I'm using fast PU glue I had to think this through and make sure everything was ready to hand. Even with preparation in place I wasn't confident about doing it all at once.

So I glued up the boxes first and using grease proof paper again I screwed the cill and top rail on to make sure it was all square.


When this had hardened up I took the cill back off removed the grease proof glued it and re-screwed it. The same with the top rail. And later I did the top inner and outer. It all worked well with only a little fettling with the plane to flatten a couple of the joints.

No comments: