Pulley stiles and top rail , cut 1 (half top rail minus 4mm). Cut 2. move the fence to make an 8mm slot. Using the fence with the extra bit added that runs on the rebate ensures the grooves will line up.
Bed time
Monday, 20 October 2008
Groove for parting beads
First mark up which edges are going to be the outside edges. With these edges against the fence rout the grooves. As I've not got a 8mm bit I needed two cuts with my 6.35mm.
Pulley stiles and top rail , cut 1 (half top rail minus 4mm). Cut 2. move the fence to make an 8mm slot. Using the fence with the extra bit added that runs on the rebate ensures the grooves will line up.
Pulley stiles and top rail , cut 1 (half top rail minus 4mm). Cut 2. move the fence to make an 8mm slot. Using the fence with the extra bit added that runs on the rebate ensures the grooves will line up.
Subscribe to:
Post Comments (Atom)
Posts
No comments:
Post a Comment